About PU Coating & Top Coat
A PU coating is a thin, tough polyurethane layer applied over primed concrete or an epoxy floor. Aliphatic PU coatings do not yellow in sunlight and provide better scratch and abrasion resistance than plain epoxy finishes.
We use PU top coats for parking decks, ramps, outdoor walkways, sun-exposed floors near windows and roller doors, and wherever a matt or satin finish is preferred.
Benefits
UV stable
Colour stays consistent in sun-exposed areas.
Better abrasion resistance
Protects epoxy floors from surface scratching.
Matt or satin options
For a non-glare architectural finish.
Anti-skid possible
Aggregate broadcast for ramps and wet zones.
Technical details
| Thickness | 100 – 300 microns |
|---|---|
| Type | Aliphatic PU (UV stable) |
| Finish | Matt / satin / gloss |
Values are typical. Final specification depends on site conditions and the selected product system.
Where it is used
Our installation process
- 01
Free site inspection
We visit, understand your process, traffic and chemicals, and check the existing floor.
- 02
Testing & recommendation
Moisture and soundness checks, then the right system and thickness — not the costliest one.
- 03
Clear quotation
Itemised per sq ft proposal with scope, timeline and warranty terms.
- 04
Surface preparation
Grinding / shot blasting, crack and joint repair, cleaning and priming.
- 05
Application
Installed by our trained team with controlled mixing and thickness checks.
- 06
Curing & handover
Protected curing, final inspection, maintenance guidance and handover.