About Epoxy Floor Coating
Epoxy floor coating is a roller-applied system of a primer and one or two pigmented epoxy coats, typically 200–500 microns thick. It seals the concrete, stops dusting and gives a clean, coloured, easy-to-maintain surface at a lower cost than self-leveling systems.
It is well-suited to warehouses, stores, parking areas, utility rooms and light-duty production floors.
Benefits
Budget-friendly
Lowest cost per sq ft among epoxy systems.
Dust-proofing
Stops concrete dusting that damages products and machines.
Quick installation
Large areas covered fast with minimal downtime.
Colour coding
Zone marking for storage, aisles and safety areas.
Technical details
| Thickness | 200 – 500 microns (DFT) |
|---|---|
| System | Epoxy primer + 1–2 pigmented epoxy coats |
| Finish | Gloss / satin; optional anti-skid |
| Light foot traffic | Typically after 24 hours |
Values are typical. Final specification depends on site conditions and the selected product system.
Where it is used
Our installation process
- 01
Free site inspection
We visit, understand your process, traffic and chemicals, and check the existing floor.
- 02
Testing & recommendation
Moisture and soundness checks, then the right system and thickness — not the costliest one.
- 03
Clear quotation
Itemised per sq ft proposal with scope, timeline and warranty terms.
- 04
Surface preparation
Grinding / shot blasting, crack and joint repair, cleaning and priming.
- 05
Application
Installed by our trained team with controlled mixing and thickness checks.
- 06
Curing & handover
Protected curing, final inspection, maintenance guidance and handover.
